Generic MPSK Decoder

 

General description

The Generic multi-tone PSK (MPSK) decoder is a universal decoder for MPSK (OFDM) transmissions. It decodes MPSK signals from 10 baud to 2500 baud/tone. It supports decoding up to 64 MPSK tones. In most cases it is used together with SkySweeper bit analyzing tool, which provides the synchronizing and character display functions. Generic MPSK does not support automatic frequency locking. The decoder frequency (=lowest tone frequency) must be set either by double clicking the left mouse button or setting the default first tone parameter in ‘Config’ dialog. The blue bar in the decoder’s spectrum display indicates the frequency of the lowest MPSK tone.

 

SkySweeper supports both FFT and waterfall display modes for decoder tuning. The Decoder Spectrum Dialog chapter gives more information about spectrum display options.

 

Configuration

Pressing the ‘Config’ button opens the following Configuration dialog box.

 

 

 

 

Parameters

Pulse Length

The MPSK tone length in milliseconds can be set here. If the mode is already known, the tone length is easy to set. If the pulse length is not known, it has to be analyzed, for example by using the PHASE display.

 

Tone Rate

The MPSK tone rate can be set here.

 

Default First Tone

This is the default frequency for the First Tone.

 

Number of Tones

Number of Tones in the MPSK transmission.

 

Tone Spacing

Tone Spacing in the MPSK transmission.

 

Negative Polarity

Inverts the bits. As a default 180 degrees phase shift means ‘1’ and 0 degrees means bit ‘0’.

 

Tones from High

If this is selected, the decoded bits are sent to the output from the highest tone to the lowest. As a default, bits are sent from the lowest tone to the highest.

 

Print Format

The generic decoder print format can be changed by pressing the right mouse button over the text area window and selecting Properties from the pop-up menu. The Properties command opens the Bit Display Configuration Dialog

 

FFT

The FFT button opens and closes the power spectrum window. You can, for example, close the power spectrum window when the decoder has been locked onto the correct frequency in order to get more space for the text window.

 

Save

The Save button opens the log file control Dialog, which is used to open or close a log file. The detector text window can also be saved into a file or sent into a socket.

 

Lock

The Lock button locks or unlocks the decoder frequency. The decoders have the ‘automatic frequency tracking’ feature. Push the Lock button when you want to lock the decoder onto a selected frequency. Push the Unlock button when you want to release the frequency locking.

 

Reset

The ‘Reset’ button resets the decoder and clears the text window.