DSP EXAMPLE

Here’s an example of SkySweeper’s wide range of DSP capabilities. This configuration has been optimized for the speech quality improvement. This speech configuration can be activated by selecting DSP->speech. In the left corner of the picture there’s a configuration editor showing the blocks currently active in the speech configuration. The user can freely add and remove blocks. In this picture there are two different analyzer displays (Spectrogram/Waterfall and power spectrum). There are also two DSP blocks. The notch bank removes automatically up to eight peak frequencies from the speech and the noise reducer improves the signal to noise ratio of the speech. The parameters of the displays can easily be changed by the right mouse click.