CW RX/TX EXAMPLE

The example demonstrates simultaneous CW reception and transmission capabilities. The CW mode can be activated by selecting RXTX->CW. In the left corner of the picture there’s a configuration editor showing the blocks currently activated in the CW mode. The user can freely add and remove blocks. Other displays like signal power and transmission spectrum or even other decoders (like PSK, RTTY or SSTV) can easily be added. In this picture there are two analyzer displays (Spectrogram/Waterfall and 3DFFT). The parameters of the displays can easily be changed by the right mouse click.

 

 

The Chat Box is the SkySweeper’s RX/TX communication application. It allows the user to configure the RX and TX separately (for example CW in RX and PSK in TX). The Chat Box also supports the macros defined by the user.