CW Keying Configuration

 

General description

The following configuration dialog is used to define the CW transmitter keying parameters. The dialog is opened from CW transmitter configuration dialog.

 

 

Parameters

 

TX Keying Enabled

If the check box is selected, the CW transmitter keying HW signal is enabled. The HW signal is generated on the selected serial port.

 

Port

The CW keying signal is generated into selected serial port (COM1-4).

 

Signal

The ‘transmitter enabled’ signal can be generated either to the RTS or the DTR serial port pin.

 

Invert

If the invert check box is selected, the polarity of the ‘transmitter enabled’ signal is inverted.

 

TX On Signal Enabled

If the check box is selected, transmitter on/off status is generated into free signal. If RTS signal is selected for keying DTR signal is used for TX status signal and vice versa.