At the current time we do not support programming to or from the V-Folders. This only requires about 1-minute and 4-5 Button presses on the radio to save the radio's working memory to a V-Scanner Folder - or go the other way. You can use SCL to program a "new" set of ten banks and in about the time it takes to load the radio 10 times you can copy "that" to a different V-Folder and then have them all loaded into the radio.

Here's How:
  (On the Radio... Manually...)
	1 - Press PGM
	2 - Press FUNC + PGM
	3 - To save to a folder Press "1"
	4 - Then Press the Folder # key
	    (IE: press 1 for folder 1)
	5 - Confirm YES by pressing "Enter".
           Or to Cancel - Press CLR"

To reverse the process:
To COPY the radio's V-Scanner Folder to "working memory"
	1 - Press PGM
	2 - Press FUNC + PGM
	3 - To restore from a folder Press "2"
	4 - Then Press the Folder # key
	    (IE: press 1 for folder 1)
	5 - Confirm YES by pressing "Enter".
           Or to Cancel - Press CLR"

These instructions are on pages 75-76 of your owners manual

Best regards

Jim
==========================================

I need to get a v channel folder #1 for my pro 96 that I accidentally overwrote. Is there somewhere I could find the file I need to plug it into my scancat lite software to reprogram my scanner?

____________________________
Computer Aided Technologies
 - http://www.scancat.com -
Order Toll Free or Order On Line 
(USA Orders Only ) 1-888-722-6228 
(NON USA Orders  ) 1-318-687-4444
(Tech Support    ) 1-318-687-2555 
(  Fax Line      ) 1-318-686-0449