The Scancat grid comes from a "third party", and they don't permit the
normal right click cut/paste,
         So use these Keyboard combinations

         CTRL + C  COPIES HIGHLIGHTED
         CTRL + X  CUTS HIGHLIGHTED
         CTRL + V  PASTES

For this example place the cursor on the FIRST frequency in the FIRST bank
Just click it once to outline that cell (selected) - If you end up going
into edit, then the paste won't work.

Normally you
         1 - highlight multiple cells
         2 - Press CTRL C (copy)
         3 - Place cursor on THE cell to start with'
                 DO NOT click it "hard" as it can go into "edit"
                    this may be the problem
                  (EDIT looks sort of "dark blue)
                 You should just see the same color cell with the Outline
                 Then Press CTRL + V and it starts at that point
                 and pastes the multiple cells

You just have to "learn" how it works, and I assure you - it will work.

jim