======================  "CLONE FILE instructions" ===============

HERE IS WHAT YOU DO:
- START SCANCAT-LITE - AND GO TO THE DATABASE SCREEN

- AT THE TOP USE THE "LOAD/READ RADIO" MENU SELECTION
   - ON THE "PULL DOWN MENU" PICK THE ONE THAT SAYS "READ ENTIRE (RADIO)"
     AND IT WILL READ THE RADIO LIKE IT NORMALLY WOULD APPEAR TO DO
     BUT IT IS (ALSO) PLACING TWO FILES ON YOUR HARD DRIVE.
    
- USING WINDOW'S EXPLORER (FILE BROWSER)
      (IF YOU DON'T KNOW HOW TO INVOKE IT)
        "CLICK"  START  + RUN + (Type in) EXPLORER.EXE
                        OR
        RIGHT CLICK ON "START" AND CHOOSE "EXPLORER"

      NAVIGATE TO THE C:\PROGRAM FILES\SCANCAT-LITE-PLUS FOLDER

 - Find these two files
          0-Clone-PRO2054.dat
          CloneDECRYPT--PRO2054.dat

        http://downloads.scancat.com/Tools-3.jpg


 THIS PAIR of files are the raw "eeprom dump" from the radio

 Send them both as attachments in an email
          SEND THEM TO THIS EMAIL ONLY

             tecKsupport@scancat.com

 (It should be in your "reply to" from this email)

This is the only email address you should use for sending attachments. All the others will reject them and you'd have to do it all over again.

Then I can take a look at the files, Load the database with them  or even load them into OUR radio. Essentially I will have cloned your radio directly into mine.

Best regards

Jim Springer